Electrical Engineer
RESPONSIBILITIES Prepare and review calculations, drawings, technical specifications, procurement documents, and other materials for procurement and construction purposes.Design, develop, validate, and oversee the installation of electrical equipment and systems.Contribute to multidisciplinary projects by preparing electrical designs and concepts for electrical power and distribution systems.Collaborate with architects, engineers, and owners to develop design concepts.Handle the design of lighting, modeling, fire alarms, communications systems, process control, and power distribution up to 44kV.Project management for electrical infrastructure projects and power systems.Analyze technical problems and provide recommendations and solutions.Prepare specifications, contract documents, and engineering progress reports, and ensure all designs conform to applicable codes and client standards.Develop detailed designs for high and low voltage system requirements in primary and secondary power distribution.Conduct applied research to provide optimal solutions for clients.Travel to construction sites to perform inspections and prepare reports.
REQUIRED QUALIFICATIONS Bachelor’s degree in electrical engineering from a recognized post-secondary institution.Licensed professional engineer in good standing with the Professional Engineers Ontario.A minimum of three (3) years of hands-on engineering experience in construction, consulting, or a related field.Strong knowledge and experience with industrial HVAC controls and the Ontario Electrical Safety Code.Proficiency in trade-off analysis and the design of electrical systems.Ontario Ministry of Labor Pre-Start Health and Safety Review.Experience with industrial HVAC controls.Intricate distribution systems and cogeneration integration.Familiarity with NBC, ABC, and OBC building codes.AutoCAD and Revit experience.
SUCCESS FACTORS Thorough understanding and expertise in detailed electrical design.Ability to communicate effectively, both verbally and in writing.The ability to balance multiple projects with varying degrees of complexity and effectively discern and respond to priorities with a sense of urgency when required.Highly collaborative, with the ability to work across departments and disciplines.Demonstrated use of initiative and pragmatic judgment in problem solving and risk control/assessment.Ability to perform key tasks independently with minimal oversight.Dedication to learning and mentoring others.
Electrical Engineer
RESPONSIBILITIES Prepare and review calculations, drawings, technical specifications, procurement documents, and other materials for procurement and construction purposes.Design, develop, validate, and oversee the installation of electrical equipment and systems.Contribute to multidisciplinary projects by preparing electrical designs and concepts for electrical power and distribution systems.Collaborate with architects, engineers, and owners to develop design concepts.Handle the design of lighting, modeling, fire alarms, communications systems, process control, and power distribution up to 44kV.Project management for electrical infrastructure projects and power systems.Analyze technical problems and provide recommendations and solutions.Prepare specifications, contract documents, and engineering progress reports, and ensure all designs conform to applicable codes and client standards.Develop detailed designs for high and low voltage system requirements in primary and secondary power distribution.Conduct applied research to provide optimal solutions for clients.Travel to construction sites to perform inspections and prepare reports.
REQUIRED QUALIFICATIONS Bachelor’s degree in electrical engineering from a recognized post-secondary institution.Licensed professional engineer in good standing with the Professional Engineers Ontario.A minimum of three (3) years of hands-on engineering experience in construction, consulting, or a related field.Strong knowledge and experience with industrial HVAC controls and the Ontario Electrical Safety Code.Proficiency in trade-off analysis and the design of electrical systems.Ontario Ministry of Labor Pre-Start Health and Safety Review.Experience with industrial HVAC controls.Intricate distribution systems and cogeneration integration.Familiarity with NBC, ABC, and OBC building codes.AutoCAD and Revit experience.
SUCCESS FACTORS Thorough understanding and expertise in detailed electrical design.Ability to communicate effectively, both verbally and in writing.The ability to balance multiple projects with varying degrees of complexity and effectively discern and respond to priorities with a sense of urgency when required.Highly collaborative, with the ability to work across departments and disciplines.Demonstrated use of initiative and pragmatic judgment in problem solving and risk control/assessment.Ability to perform key tasks independently with minimal oversight.Dedication to learning and mentoring others.
Mechanical Engineer (MCMG)Location: Elora, Ontario
The Mechanical Engineer is essential for supporting the design and execution of mechanical projects within the food and beverage industry.
RESPONSIBILITIES Design all types of mechanical systems and equipment selection for use in various types of food or beverage plants including HVAC (offices/production areas, heat loss/gain, duct design), underground plumbing (storm, sanitary, process sanitary, grease interceptors) and plumbing systemsinvolving domestic hot/cold water, hydronic heating and cooling/glycol systems, high pressure wash system, water treatment systems (softening, reverse osmosis), natural gas facility distribution.Process hot water and steam boiler equipment selection, including steam/condensate piping design and component selection.Conduct final inspection and recommend acceptance or rejection of completed designs.Improve operations, reduce turnaround times, and optimize processes to provide seamless quality engineering services.Verify and validate engineering designs by testing protocols and analyzing statistical data.Assist with the development of project plans, project costing, and coordinating the efforts of other engineers, technicians, designers, and drafters to support cross-functional collaboration.Create and maintain comprehensive project documentation.Evaluate various mechanical products under consideration for purchase to determine their efficiency and cost-effectiveness.Determine budget requirements for mechanical systems and submit budgetary recommendations as well as monitor and be responsible for budgets throughout the project.Work closely with architectural, electrical, civil, and structural disciplines to ensure building projects are completed to the client’s satisfaction.Coach junior engineers and work closely with project technologists to develop plans to the client’s satisfaction.Evaluate process equipment for use by clients and make recommendations.
REQUIRED QUALIFICATIONS Bachelor’s degree in mechanical engineering from a recognized post-secondary institution.Licensed professional engineer in good standing with the Professional Engineers Ontario.Three (3) to five (5) years of hands-on engineering experience in the food or pharmaceutical industry, or a related field.Working knowledge of Ontario Building Code for Plumbing and HVAC, Ontario Fire Code, CFIA, ASHRAE STD as applied to HVAC and Refrigeration, NFPA, OSHA, TSSA, CSA Standard for fuel-related appliances and equipment.Understanding of Ammonia and Halocarbon refrigeration systems.Proven track record of managing large project budgets.Ability to create and review technical documentation, including project plans, test procedures, and design documents.AutoCAD and Revit experience.MS Office(Outlook, Project, Word, Excel).
S
Mechanical Engineer (MCMG)Location: Elora, Ontario
The Mechanical Engineer is essential for supporting the design and execution of mechanical projects within the food and beverage industry.
RESPONSIBILITIES Design all types of mechanical systems and equipment selection for use in various types of food or beverage plants including HVAC (offices/production areas, heat loss/gain, duct design), underground plumbing (storm, sanitary, process sanitary, grease interceptors) and plumbing systemsinvolving domestic hot/cold water, hydronic heating and cooling/glycol systems, high pressure wash system, water treatment systems (softening, reverse osmosis), natural gas facility distribution.Process hot water and steam boiler equipment selection, including steam/condensate piping design and component selection.Conduct final inspection and recommend acceptance or rejection of completed designs.Improve operations, reduce turnaround times, and optimize processes to provide seamless quality engineering services.Verify and validate engineering designs by testing protocols and analyzing statistical data.Assist with the development of project plans, project costing, and coordinating the efforts of other engineers, technicians, designers, and drafters to support cross-functional collaboration.Create and maintain comprehensive project documentation.Evaluate various mechanical products under consideration for purchase to determine their efficiency and cost-effectiveness.Determine budget requirements for mechanical systems and submit budgetary recommendations as well as monitor and be responsible for budgets throughout the project.Work closely with architectural, electrical, civil, and structural disciplines to ensure building projects are completed to the client’s satisfaction.Coach junior engineers and work closely with project technologists to develop plans to the client’s satisfaction.Evaluate process equipment for use by clients and make recommendations.
REQUIRED QUALIFICATIONS Bachelor’s degree in mechanical engineering from a recognized post-secondary institution.Licensed professional engineer in good standing with the Professional Engineers Ontario.Three (3) to five (5) years of hands-on engineering experience in the food or pharmaceutical industry, or a related field.Working knowledge of Ontario Building Code for Plumbing and HVAC, Ontario Fire Code, CFIA, ASHRAE STD as applied to HVAC and Refrigeration, NFPA, OSHA, TSSA, CSA Standard for fuel-related appliances and equipment.Understanding of Ammonia and Halocarbon refrigeration systems.Proven track record of managing large project budgets.Ability to create and review technical documentation, including project plans, test procedures, and design documents.AutoCAD and Revit experience.MS Office(Outlook, Project, Word, Excel).
S
Get AI-powered advice on this job and more exclusive features. This range is provided by Cain & Associates. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. Base pay range CA$85,000.00/yr - CA$130,000.00/yr Electrical Engineer Responsibilities Prepare and review calculations, drawings, technical specifications, procurement documents, and other materials for procurement and construction purposes. Design, develop, validate, and oversee the installation of electrical equipment and systems. Contribute to multidisciplinary projects by preparing electrical designs and concepts for electrical power and distribution systems. Collaborate with architects, engineers, and owners to develop design concepts. Handle the design of lighting, modeling, fire alarms, communications systems, process control, and power distribution up to 44kV. Project management for electrical infrastructure projects and power systems. Analyze technical problems and provide recommendations and solutions. Prepare specifications, contract documents, and engineering progress reports, and ensure all designs conform to applicable codes and client standards. Develop detailed designs for high and low voltage system requirements in primary and secondary power distribution. Conduct applied research to provide optimal solutions for clients. Travel to construction sites to perform inspections and prepare reports. Required Qualifications Bachelor’s degree in electrical engineering from a recognized post-secondary institution. Licensed professional engineer in good standing with the Professional Engineers Ontario. A minimum of three (3) years of hands‑on engineering experience in construction, consulting, or a related field. Strong knowledge and experience with industrial HVAC controls and the Ontario Electrical Safety Code. Proficiency in trade‑off analysis and the design of electrical systems. Ontario Ministry of Labor Pre‑Start Health and Safety Review. Experience with industrial HVAC controls. Intricate distribution systems and cogeneration integration. Familiarity with NBC, ABC, and OBC building codes. AutoCAD and Revit experience. Success Factors Thorough understanding and expertise in detailed electrical design. Ability to communicate effectively, both verbally and in writing. The ability to balance multiple projects with varying degrees of complexity and effectively discern and respond to priorities with a sense of urgency when required. Highly collaborative, with the ability to work across departments and disciplines. Demonstrated use of initiative and pragmatic judgment in problem solving and risk control/assessment. Ability to perform key tasks independently with minimal oversight. Dedication to learning and mentoring others. Seniority level Not Applicable Employment type Full‑time Job function Engineering, Consulting, and Manufacturing Business Consulting and Services, Building Construction, and Engineering Services Referrals increase your chances of interviewing at Cain & Associates by 2x Greater Kitchener-Cambridge-Waterloo Metropolitan Area 2 weeks ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr
An engineering consulting firm seeks an experienced Electrical Engineer for a full-time position in Guelph, Ontario. The role involves designing, developing, and installing electrical systems, with responsibilities including project management and collaborating across departments. Candidates must have a degree in electrical engineering, relevant professional licensing, and a minimum of three years' experience. This position offers a competitive salary range from CA$85,000 to CA$130,000 annually.
#J-18808-Ljbffr
